My spacebar does not trigger reliably when I press it all the way out on the edge Production toleranceIf the space bar or another large-area key seems to be unreliable in its actuation, we might have a little production tolerance issue on hand. We usually catch such issues in our own quality control checks, but on some occasions, it might still end up with the user - also considering that everyone is using different amount of force when typing.A hotfix might be possibleBesides returning the laptop, it may help to increase the height of the space bar with a simple piece of tape. However, this modification is not very easy. Another way of improving response might be to slightly bend the metal stabilizer bars in a certain way - but that's even more difficult and error-prone.Schematically, the tape solution works as follows (using the space bar as an example): Remove space bar Stick a small piece of tape on the bottom of the space bar - where the space bar touches the switch underneath. Repeat this step several times, if necessary, until the required height is reached. Reinstalling the space bar Removing the space bar is comparatively easy on the XMG FUSION and XMG NEO with a mechanical keyboard (see video). For all other models, the risk of damaging the latch located underneath the key is much higher. For this reason, we recommend contacting our support team first in case of such keyboard problems.Cleaning the keyboard might helpIf the problem only occurs after a few months or years of use, some particles (e.g. a grain of sand) underneath the key might possibly be responsible for the unreliable release behaviour. Please check the FAQ item "How to clean the keyboard" in the "Maintenance" category.